Quick contact
Paste
MSDS
PEROXAN BCC-Paste 50 A
Peroxydicarbonate / Polymerization / Curing / Crosslinking
Di-(4-tert-butyl-cyclohexyl)-peroxydicarbonate
50%,
Paste with plasticizer
PEROXAN BCC-Paste 50 A is used for the curing of highly filled methacrylic resins, typically in combination with other peroxides of different reactivity.
TDS UP
« back
PEROXAN BCC-Paste 50 A
Molecular weight:
CAS No.:
398.5
15520-11-3
Appearance:
Peroxide assay:
Active oxygen assay:
Density at 20°C:
white paste
appx. 50%
appx. 2%
1.14 g/cm³
Maximum storage temperature (Ts max):
Minimum storage temperature (Ts min):
Storage stability as from date of delivery:
15°C
5°C
6 months
Keep packaging tightly closed in a well ventilated place at indicated storage temperature. Keep away from reducing agents e.g. amines, acids, alkalis, heavy metal compounds (e.g. accelerators, driers, metal soaps). Never weigh out in storage room.
Oxidizing agent. Decomposes violently under the influence of heat or by contact with reducing agent. Never mix with accelerators.
|
SADT: |
40°C |
The SADT (Self Accelerating Decomposition Temperature) is the lowest temperature at which a self accelerating decomposition may occur.
|
Schlavenhorst 71 D-46395 Bocholt Germany |
Phone: +49 (0)2871 / 99 02-0 Fax: +49 (0)2871 / 99 02-50 www.pergan.com |
HPUPCL/003/0919 Page 1 of 2 |
PEROXAN BCC-Paste 50 A
Peroxydicarbonate / Polymerization / Curing / Crosslinking
PEROXAN BCC-Paste 50 A is used for the curing of highly filled methacrylic resins, typically in combination with other curing agents of different reactivity, e.g. PEROXAN LP and PEROXAN PB.
PEROXAN BCC-Paste 50 A shows a high reactivity at elevated temperature, which is demonstrated by ist low activation temperature, in combinatio with a relatively long pot life at ambient temperatures. PEROXAN BCC-Paste 50 A is used in combination with a low reactive peroxide to ensure a good final cure. These peroxide combinations can successfully be used for those applications where a long gel time is required at room temperature in combination with a fast cure at elevated temperatures of 60°C to 140°C. Applications areas can be cure-in-place-pipe (CIPP), pultrusion, filament winding, manufacturing of artificial marble.
Depending on working conditions, the following dosage level is recommended:
PEROXAN BCC-Paste 50 A as such: 2,0 to 4,0 phr
PEROXAN BCC-Paste 50 A as kicker peroxide: 1,0 to 2,0 phr
Please refer to the material safety data sheet (MSDS) for information concerning safe storage, use and handling of PEROXAN BCC-Paste 50 A. This information should be thoroughly reviewed prior to acceptance of this product. The MSDS is available for downloading at www.pergan.com or through contacting Pergan directly.
|
Schlavenhorst 71 D-46395 Bocholt Germany |
Phone: +49 (0)2871 / 99 02-0 Fax: +49 (0)2871 / 99 02-50 www.pergan.com |
HPUPCL/003/0919 Page 2 of 2 |
Material Safety Data Sheets
Here you can download safety data sheets according to Regulation (EC) no. 1907/2006.
Safety Data Sheets are an important source of information on chemicals, such as identity of the product,
occurring hazards, transport, safe handling and measures for prevention in case of danger